How do I install/remove the pedals of the F250?

Your Brekr F250 has replaceable pedals, see the steps below on how to install or remove the pedals of your F250.
 

Install

  1. Grab the pedals and determine which pedal is left and which pedal is right by looking at the end of the thread.
  2. Determine the placement of the pedals on the bike, considering left and right while you are positioned on the saddle of the F250.
  3. If you’ve identified the correct position for the pedals, initiate the installation by hand-tightening the left pedal counterclockwise and the right pedal clockwise at the threaded connection.
  4. Make sure the side where you want to tighten the crank is facing forward to make it easier to secure the pedal.
  5. Now, with the crank facing forward, tighten the left pedal counterclockwise and the right pedal clockwise by holding the pedal and using a 15mm socket wrench.

Remove

  1. Make sure the crank is facing forward on the side you want to loosen the pedal.
  2. If the crank is facing forward, locate the connection between the pedal and the crank.
  3. Check the inside of the crank to see which pedal is left and right.
  4. Loosen the left pedal clockwise and the right pedal counterclockwise at the connection by holding the pedal and using a 15mm socket wrench.

Related articles